Outlander AWD L4-2.4L (4B12) (2010)
/Page-611020.png)
OK: No continuity
Q: Is the check result normal?
YES : Go to Step 16.
NO : Repair the wiring harness between joint connector (CAN2) C-04 and ETACS-ECU connector C-301.
STEP 16. Using scan tool MB991958, diagnose the CAN bus line.
CAUTION: To prevent damage to scan tool MB991958, always turn the ignition switch to the "LOCK" (OFF) position before connecting or
disconnecting scan tool MB991958.
1. Connect scan tool MB991958 to the data link connector.
2. Turn the ignition switch to the "ON" position.
3. Diagnose CAN bus lines, and check if the scan tool screen is as shown in the illustration.
Q: Does the scan tool screen correspond to the illustration?
YES : The trouble can be an intermittent malfunction
NO : Replace the ETACS-ECU.
Diagnostic Item 4
DIAGNOSTIC ITEM 4: Diagnose shorts in the ground to CAN-C bus line.
CAUTION: When servicing a CAN bus line, ground yourself by touching a metal object such as an unpainted water pipe. If you fail to do so, a
component connected to the CAN bus line may be damaged.
