Outlander AWD L4-2.4L (4B12) (2010)
/Page-611024.png)
OK: 1 kohms or more
3. Measure the resistance between joint connector (CAN2) terminal 15 and body ground.
OK: 1 kohms or more
Q: Do all the resistances measure 1 kohms or more?
YES [FWD] : Go to Step 5.
YES [Electric controlled AWD] : Go to Step 3.
YES [S-AWC] : Go to Step 4.
NO : Go to Step 8.
STEP 3 Check the wiring harness between joint connector (CAN2) C-04 and AWD-ECU connector C-128 for a short to ground. Measure the
resistance at joint connector (CAN2) C-04.
1. Disconnect joint connector (CAN2), and measure the resistance at the wiring harness side of joint connector (CAN2).
2. Measure the resistance between joint connector (CAN2) terminal 5 and body ground.
OK: 1 kohms or more
3. Measure the resistance between joint connector (CAN2) terminal 16 and body ground.
OK: 1 kohms or more
