Outlander AWD L4-2.4L (4B12) (2010)
2. Measure the resistance between joint connector (CAN3) terminal 4 and body ground.
OK: 1 kohms or more
3. Measure the resistance between joint connector (CAN3) terminal 15 and body ground.
OK: 1 kohms or more
Q: Do all the resistances measure 1 kohms or more?
YES : Go to Step 6.
NO : Go to Step 12.
STEP 6. Check the wiring harness between joint connector (CAN3) C-01 and ABS-ECU connector A-01 [vehicles without ASC] or ASC-ECU
connector A-02 [vehicles with ASC] for a short to ground. Measure the resistance at joint connector (CAN3) C-01.
1. Disconnect joint connector (CAN3), and measure the resistance at the wiring harness side of joint connector (CAN3).
2. Measure the resistance between joint connector (CAN3) terminal 6 and body ground.
OK: 1 kohms or more