Outlander AWD L4-2.4L (4B12) (2010)
/Page-611158.png)
2. Check that there is continuity between joint connector (CAN1) terminals 2 and 13.
OK: No continuity
Q: Is the check result normal?
YES : Go to Step 30.
NO : Go to Step 51.
STEP 30. Check the wiring harness between joint connector (CAN1) C-103 and occupant classification-ECU connector D-34-2 for line-to-line
short. Measure the resistance at joint connector (CAN1) C-103.
1. Disconnect joint connector (CAN1), and check that there is continuity at the harness side of joint connector (CAN1).
2. Check that there is continuity between joint connector (CAN1) terminals 11 and 24.
OK: No continuity
Q: Is the check result normal?
YES (vehicles without hands-free cellular phone system) : Go to Step 32.
YES (vehicles with hands-free cellular phone system) : Go to Step 31.
NO : Go to Step 52.
STEP 31. Check the wiring harness between joint connector (CAN1) C-103 and hands free module connector C-121 for line-to-line short.
Measure the resistance at joint connector (CAN1) C-103.
1. Disconnect joint connector (CAN1), and check that there is continuity at the harness side of joint connector (CAN1).
