Outlander AWD L4-2.4L (4B12) (2010)
/Page-611160.png)
2. Check that there is continuity between joint connector (CAN1) terminals 10 and 23.
OK: No continuity
Q: Is the check result normal?
YES (vehicles without satellite radio) : Go to Step 36.
YES (vehicles with satellite radio) : Go to Step 35.
NO : Go to Step 55.
STEP 34. Check the wiring harness between joint connector (CAN1) C-103 and CAN box unit connector C-13 for line-to-line short. Measure
the resistance at joint connector (CAN1) C-103.
1. Disconnect joint connector (CAN1), and check that there is continuity at the harness side of joint connector (CAN1).
2. Check that there is continuity between joint connector (CAN1) terminals 10 and 23.
OK: No continuity
Q: Is the check result normal?
YES (vehicles without satellite radio) : Go to Step 36.
YES (vehicles with satellite radio) : Go to Step 35.
NO : Go to Step 56.
STEP 35. Check the wiring harness between joint connector (CAN1) C-103 and satellite radio tuner connector C-111 for line-to-line short.
Measure the resistance at joint connector (CAN1) C-103.
1. Disconnect joint connector (CAN1), and check that there is continuity at the harness side of joint connector (CAN1).