Outlander AWD L4-2.4L (4B12) (2010)
diagnose the condition, repair as described in this bulletin and submit a normal warranty claim using the information shown above.
Repair Procedure
REPAIR PROCEDURE
ECM REPROGRAMMING CHART
1. Check the underside of the hood to verify there is no Authorized Modification label previously installed to indicate this reprogramming has already
been done. If a label is present and the "ROM ID #" on the label matches the "New S/W Part No." in the table shown above, the ECM is at the latest
level and reprogramming is not necessary.
For MEDIC II users only: (MUT-III users go to step 5)
2. Verify the MEDIC-II is at version 5.6 and at download M384 or higher.
If your MEDIC-II Download is at least M384, continue with the Reprogramming Procedure.
If your MEDIC-II Download is below M384, update your MEDIC-II as follows.
3. On the MEDIC-II main screen, click on "Maintenance".