Outlander AWD L4-2.4L (4B12) (2010)
a. Select "Special Function."
b. Select "All DTCS," then select ERASE AND READ ALL DTCS.
c. Click the check mark to Erase and Read all DTCs.
This step erases DTCs in all ECMs and then rechecks to confirm that they do not return.
d. A pop up window will ask you to confirm Erase and Read All DTCs. Click the check mark in the pop up window to continue.
4. When DTC erasing is completed a window will pop up. Click the check mark to clear the window. If DTCs remain diagnose and repair the condition
as per the service manual. If no additional DTCs are listed click the check mark to clear the window and then click the Home icon in the lower left of the
screen to return to the main menu.
5. Turn off the ignition switch and disconnect the MUT-III. Turn off and disconnect the battery charger.
6. Test drive the vehicle to confirm proper operation and MIL does not illuminate.