Outlander AWD L4-2.4L (4B12) (2010)
-
MB991827: M.U.T.-III USB Cable
-
MB991910: M.U.T.-III Main Harness A
-
MB992006: Extra Fine Probe
REMOVAL SERVICE POINTS
[[A]] NEGATIVE (-) BATTERY CABLE DISCONNECTION
DANGER: Wait at least 60 seconds after disconnecting the battery cable before doing any further work.
WARNING: Battery posts, terminals and related accessories contain lead and lead compounds. WASH HANDS AFTER HANDLING.
Disconnect the negative (-) battery cable from the battery and tape the terminal to prevent accidental connection and air bag(s) deployment.
[[B]] COVER REMOVAL
Insert the ornament remover (Special tool: MB990784) into the notch shown in the figure, and remove the cover.
[[C]] DRIVER'S AIR BAG MODULE CONNECTOR REMOVAL