Outlander AWD L4-2.4L (4B12) (2010)
/Page-119001.png)
Cruise Control Switch: Testing and Inspection
Cruise Control "on/Off" Switch Check
ON-VEHICLE SERVICE
CRUISE CONTROL SYSTEM OPERATION CHECK
CRUISE CONTROL "ON/OFF" SWITCH CHECK
1. Turn the ignition switch to the "ON" position.
2. Check that the "CRUISE" indicator light within the combination meter illuminates when the "ON/OFF" switch is pressed (cruise control system:
ON).
3. Press the "ON/OFF" switch again (cruise control system: OFF), and check that the "CRUISE" indicator light within the combination meter goes
out.
CRUISE CONTROL SETTING
1. Press the "ON/OFF" switch (cruise control system: ON, "CRUISE" indicator light: illuminated).
2. Drive at the desired speed, above approximately 40 km/h (25 mph).
