Outlander AWD L4-2.4L (4B12) (2010)
Cause of problem
-
Sensor interface malfunction.
Wave pattern characteristics
-
Rectangular wave pattern is output even when the engine is not started.
Example 2
Cause of problem
-
Loose timing belt.
-
Abnormality in sensor disc.
Wave pattern characteristics
-
Wave pattern is displaced to the left or right.
EXHAUST CAMSHAFT POSITION SENSOR AND CRANKSHAFT POSITION SENSOR
Required Special Tools:
-
MB991709: Test Harness
-
MB992110: Power Plant ECU Check Harness
Measurement Method
1. Disconnect the exhaust camshaft position sensor connector, and connect the test harness special tool (MB991709) between the separated connector
(All terminals should be connected).
2. Connect the oscilloscope probe to exhaust camshaft position sensor connector terminal No. 3.