Outlander AWD L4-2.4L (4B12) (2010)
REMOVAL AND INSTALLATION
WARNING:
-
Never attempt to disassemble or repair the side impact sensor. If faulty, replace it.
-
Do not drop or subject the side impact sensor to impact or vibration. Replace the side impact sensor, if dents, cracking, deformation, or
rust are present.
-
Replace the side impact sensor after the side and curtain air bag has deployed.
Pre-removal Operation
Removal Steps 1-3
NOTE: The illustration above shows the side impact sensor (RH). The position of the side impact sensor (LH) is symmetrical to this.
REMOVAL SERVICE POINTS