Outlander AWD L4-2.4L (4B12) (2010)
Ignition Switch: Symptom Related Diagnostic Procedures
Trouble Symptom Chart
TROUBLE SYMPTOM CHART
Trouble Symptom Chart
Inspection Procedure 1
Inspection Procedure 1: Ignition Key Cylinder Illumination Light Does Not Illuminate/extinguish Normally. [Vehicles With WCM]
CAUTION: Whenever the ECU is replaced, ensure that the input and output signal circuits are normal.
Ignition Key Cylinder Illumination Light Circuit
OPERATION
The ETACS-ECU operates this function in accordance with the input signals below.
-
Ignition switch (IG1)
-
Key reminder switch
-
Driver's door switch