Outlander AWD L4-2.4L (4B12) (2010)
Alternator: Removal and Replacement
REMOVAL AND INSTALLATION [2.4L ENGINE]
Pre-removal & Post-installation Operation
Removal Steps 1-7
REMOVAL SERVICE POINTS
[[A]] A/C COMPRESSOR ASSEMBLY REMOVAL
1. Remove the A/C compressor assembly from the A/C compressor bracket with the hose still attached.
2. Place the removed A/C compressor assembly where it will not be a hindrance when removing and installing the generator assembly, and secure it
with a cord or wire.
[[B]] GENERATOR ASSEMBLY REMOVAL
Move the A/C compressor assembly to one side, and then remove the generator assembly from under the vehicle.
INSTALLATION SERVICE POINTS
]]A[[ GROUNDING CABLE INSTALLATION