Outlander AWD L4-2.4L (4B12) (2010)
coil spring.
3. While passing the strut piston rod through the hole of upper insulator by hand, slowly compress the coil spring by the following special tool:
^
Spring compressor (MB991793)
^
Attachment A (MB991795)
^
Upper plate (MB991794)
^
Fixture (MB991830)
CAUTION
The locking nut for the piston rod inside the strut may be loose. Do not use the impact wrench to loosen the strut nut (jam nut).
4. Use the following special tools to tighten the strut nut (jam nut) to the specified torque:
^
Wrench (MB991681)
^
Socket (MB991682)
Tightening torque: 60 ±9 Nm (45 ± 6 ft-lb)
5 Person Seat
SHOCK ABSORBER ASSEMBLY
DISASSEMBLY AND ASSEMBLY [2.4L ENGINE: 5 PERSONS SEAT]