Outlander AWD L4-2.4L (4B12) (2010)
/Page-868001.png)
Transmission Mount: Service and Repair
TRANSAXLE MOUNTING
REMOVAL AND INSTALLATION [2.4L ENGINE]
Pre-removal & Post-installation Operation
Removal Steps 1-3
REMOVAL SERVICE POINT
[A] TRANSAXLE MOUNTING BRACKET REMOVAL
1. Place a garage jack against the transaxle case with a piece of wood in between to support the engine and transaxle assembly.
2. Operate a garage jack so that the transaxle weight is not applied to the transaxle mounting insulator, and remove the transaxle mounting bracket.
INSTALLATION SERVICE POINT
[A] TRANSAXLE MOUNTING INSULATOR STOPPER INSTALLATION
