Outlander AWD L4-2.4L (4B12) (2010)
Wiper Motor: Service and Repair
Windshield Wiper
WINDSHIELD WIPER
REMOVAL AND INSTALLATION
Removal Steps 1-8
Required Special Tool:
-
MB991955: M.U.T.-III sub-assembly
-
MB991223: Harness set
NOTE: For removal and installation of the wiper and washer switch, refer to Chassis Electrical, Column switch.
REMOVAL SERVICE POINT
[[A]] WINDSHIELD WIPER MOTOR REMOVAL
1. Remove the wiper link rod joint from the wiper motor link plate.