Outlander AWD L4-2.4L SOHC (2003)
Sound Proofing / Insulation: Locations
Locations Using Urethane Foam and Foam Material
LOCATIONS USING URETHANE FOAM AND FOAM MATERIAL
-
Introduction of noise was prevented by inserting urethane foam inside the center pillar.
-
Introduction of noise was prevented by adding foam noise absorbing materials inside each pillar, side roof rail and wheel house arch interior.
-
High rigidity foam materials were added inside the front sidemember (LH only) to heighten panel rigidity.
CAUTION: Precautions upon sheet metal processing the areas using foam materials.
The foam materials may burn when heated.
Always observe the following instructions.