Outlander AWD L4-2.4L SOHC (2003)
Fuel Pressure Release: Service and Repair
FUEL PUMP CONNECTOR DISCONNECTION (HOW TO REDUCE PRESSURIZED FUEL LINES)
WARNING: WHEN REMOVING THE FUEL PIPE, ETC., RELEASE FUEL PRESSURE TO PREVENT FUEL SPRAY.
1. Remove the rear seat assembly.
2. Remove the protector.
3. Disconnect the fuel pump module connector.
4. After starting the engine and letting it run until it stops naturally, turn the ignition switch to the "LOCK" (OFF) position.
5. Connect the fuel pump module connector.
6. Install the protector and rear seat assembly.
