mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 5451 > < Initial Inspection and Diagnostic Overview|Page 5449
Page 6
background image

3. Check at inside rear view mirror harness side connector (front side) D-03.

Q: Is the resistance between terminal 3 and ground less than 2 ohms?

YES : Go to Step 7.

NO : Go to Step 5.

STEP 5. Check the inside rear view mirror connector D-03 connector for damage.

Q: Is the inside rear view mirror connector D-03 in good condition?

YES : Go to Step 6.

NO : Repair or replace the connector. Go to Step 7.

STEP 6. Check the wiring harness between inside rear view mirror D-03 and ground.

Initial Inspection and Diagnostic Overview|Page 5451 > < Initial Inspection and Diagnostic Overview|Page 5449