Outlander AWD L4-2.4L SOHC (2003)
Dome Lamp: Testing and Inspection
DOME LIGHT DIAGNOSIS
Room light delay shutdown function
The room light off is delayed by ETACS-ECU. The lights off delay time vary according to the conditions. The control details are as follows. The light
delay off Yes/NO and delay time can be set with the settings (adjustment function). Refer to ADJUSTMENT PROCEDURES OF SWS FUNCTION for
adjustment methods and adjustment details (post-adjustment operations).
-
The room light lights up if the ignition switch is at the "LOCK" (OFF) position and either of the doors are opened (either of the door switches:
ON). At this time, if all doors are closed (all door switches: OFF) then the light will gradually dim down to lights off in about 30 seconds.
NOTE: When the lights are dimmed and the ignition switch is turned ON or if the door is locked, then the dimming operations stop and the lights are
turned OFF.
-
When the ignition switch is at the ON position and one of the doors are opened (one of the door switches: ON) then the room light will light up. At
this time, if all doors are closed (all door switches: OFF) then the lights will dim out.
-
When the ignition key is pulled out the room lights up and then will dim out in 30 seconds. The light will dim out if the ignition key is inserted
again and the door is locked while the timer is activated.
Interior light automatic cut function
The interior light automatic cut function, dims out the room light and other interior lights by activating the keep relay built-in the ETACS-ECU when the
ignition switch is OFF and the multi-purpose fuse loaded signals built-in the ETACS-ECU is ON and 30 second passes. The lights light back up if the
ignition switch is turned to the ON position or either of the doors is opened (either of the door switches: ON). The function Yes/No feature can be
changed with the settings (adjustment function). Refer to ADJUSTMENT PROCEDURES OF SWS FUNCTION for adjustment methods and
adjustment details (post-adjustment operations).
The lights are controlled by the Simplified Wiring System (SWS). For troubleshooting, refer to SWS Diagnosis.
Computers and Control Systems / Information Bus / Diagnosis.
See: Powertrain Management/Computers and Control Systems/Information Bus