Outlander AWD L4-2.4L SOHC (2003)
Q: Is the wiring harness from ETACS-ECU connectors C-220 (terminal 22) and C-217 (terminal 12) to driver's door lock actuator connector E-10
(terminals 4 and 6) in good condition?
YES: Replace the ETACS-ECU. Verify that all the doors can be locked and unlocked normally.
NO: The wiring harness may be damaged or the connectors may have loose, corroded or damaged terminals, or terminals pushed back in the
connector. Repair the wiring harness as necessary. After repairs have been made, verify that all the doors can now be locked and unlocked normally.
STEP 5. Check the front passenger's door lock actuator.
1. Remove the passenger's door lock actuator, and check it. Refer to Door Handle and Latch.