Outlander AWD L4-2.4L SOHC (2003)
2. Measure the voltage between terminal 5 and ground.
-
The voltage should equal approximately 12 volts (battery positive voltage).
Q: Is the measured voltage approximately 12 volts (battery positive voltage)?
YES: Go to Step 7.
NO: Go to Step 5.
STEP 5. Check power window relay connector C-208 for loose, corroded or damaged terminals, or terminals pushed back in the connector.
Q: Is power window relay connector C-208 in good condition?
YES: Go to Step 6.
NO: Repair or replace the damaged components). Refer to Harness Connector Inspection. The power windows function should work now normally.
STEP 6. Check the wiring harness between power window relay connector C-208 (terminal 5) and fusible link 5.