Outlander AWD L4-2.4L SOHC (2003)
YES: No action is necessary and testing is complete.
NO: The wiring harness may be damaged or the connector(s) may have loose, corroded or damaged terminals, or terminals pushed back in the
connector. Repair the wiring harness as necessary. The power windows function should work now normally.
STEP 7. Check the ground circuit to the power window relay. Test at power window relay connector C-208.
1. Disconnect power window relay connector C-208 and measure the resistance available at the junction block side of the connector.
2. Measure the resistance value between terminal 3 and ground.
-
The resistance should equal 2 ohms or less.
Q: Is the measured resistance 2 ohms or less?
YES: Go to Step 10.
NO: Go to Step 8.
STEP 8. Check power window relay connector C-208 for loose, corroded or damaged terminals, or terminals pushed back in the connector.
Q: Is power window relay connector C-208 in good condition?
YES: Go to Step 9.
NO: Repair or replace the damaged components). Refer to Harness Connector Inspection. The power windows function should work now normally.
STEP 9. Check the wiring harness between power window relay connector C-208 (terminal 3) and ground.
