Outlander AWD L4-2.4L SOHC (2003)
Q: Is the wiring harness between power window relay connector C-208 (terminal 4) and rear power window sub-switch (RH) connector E-19
(terminal 5) in good condition?
YES: No action is necessary and testing is complete.
NO: The wiring harness may be damaged or the connector(s) may have loose, corroded or damaged terminals, or terminals pushed back in the
connector. Repair the wiring harness as necessary. The rear power window (RH) function should work now normally.
STEP 35. Check the ground circuit to the rear power window sub-switch (RH). Test at rear power window sub-switch (RH) connector E-19.
1. Disconnect rear power window sub-switch (RH) connector E-19 and measure the resistance available at the harness side of the connector.