Outlander AWD L4-2.4L SOHC (2003)
NOTE: Also check intermediate connector A-14 for loose, corroded, or damaged terminals, or terminals pushed back in the connector. If intermediate
connector A-14 is damaged, repair or replace the damaged components) as described in Harness Connector Inspection.
Q: Is the wiring harness between windshield wiper motor connector B-07 (terminals 1 and 4) and front-ECU connector A-12X (terminals 24 and 25)
in good condition?
YES: No action is necessary and testing is complete.
NO: The wiring harness may be damaged or the connector(s) may have loose, corroded or damaged terminals, or terminals pushed back in the
connector. Repair the wiring harness as necessary. Verify that the windshield wiper operates normally when the windshield wiper switch is moved to
each position.
Inspection Procedure G-4
Windshield Wiper and Washer: The windshield wiper does not stop at the predetermined park position.