Outlander AWD L4-2.4L SOHC (2003)
YES: No action is necessary and testing is complete.
NO: The wiring harness may be damaged or the connector(s) may have loose, corroded or damaged terminals, or terminals pushed back in the
connector. Repair the wiring harness as necessary. The windshield wiper should now stop at the predetermined park position.
STEP 5. Check windshield wiper motor connector B-07 and front-ECU connector A-12X for loose, corroded or damaged terminals, or
terminals pushed back in the connector.
Q: Are windshield wiper motor connector B-07 and front-ECU connector A-12X in good condition?
YES: Go to Step 6.
NO: The wiring harness may be damaged or the connector(s) may have loose, corroded or damaged terminals, or terminals pushed back in the
connector. Repair the wiring harness as necessary. Refer to Harness Connector Inspection. The windshield wiper should now stop at the predetermined
park position.
STEP 6. Check the wiring harness between windshield wiper motor connector B-07 (terminal 3) and front-ECU connector A-12X (terminal 29).