Outlander AWD L4-2.4L SOHC (2003)
Q: Is the wiring harness between rear combination light (LH) connector D-18 (terminal 2) and front-ECU connector A-11X (terminal 4) in good
condition?
YES: No action is necessary and testing is complete.
NO: The wiring harness may be damaged or the connector(s) may have loose, corroded or damaged terminals, or terminals pushed back in the
connector. Repair the wiring harness as necessary. Verify that the taillight (LH), license plate light and rear sidemarker light (LH) illuminates
normally.
STEP 4. Check rear combination light (RH) connector D-13 and front-ECU connector A-11X for loose, corroded or damaged terminals, or
terminals pushed back in the connector.
Q: Are rear combination light (RH) connector D-13 and front-ECU connector A-11X in good condition?
YES: Go to Step 5.
NO: Repair or replace the damaged components). Refer to Harness Connector Inspection. Verify that the taillight (RH) and rear sidemarker light (RH)
illuminates normally.
STEP 5. Check the wiring harness between rear combination light (RH) connector D-13 (terminal 2) and front-ECU connector A-11X (terminal
4).
