Outlander AWD L4-2.4L SOHC (2003)
Q: Is the wiring harness between rear combination light (LH) connector D-18 (terminal 3) and ground in good condition?
YES: Replace the rear combination light socket (LH). Verify that the taillight (LH) illuminate normally.
NO: The wiring harness may be damaged or the connector(s) may have loose, corroded or damaged terminals, or terminals pushed back in the
connector. Repair the wiring harness as necessary. Verify that the taillights (LH) illuminate normally.
Part 2
Headlight, Taillight: Tail lights, the position lights, the rear sidemarker lights or the license plate light do not illuminate.
STEP 25. Check rear combination light (LH) connector D-18 and front-ECU connector A-11X for loose, corroded or damaged terminals, or
terminals pushed back in the connector.
Q: Are rear combination light (LH) connector D-18 and front-ECU connector A-11X in good condition?
