Outlander AWD L4-2.4L SOHC (2003)
Q: Is the daytime running light-ECU connector A-17 in good condition?
YES: Go to Step 4.
NO: Repair or replace the damaged components). Refer to Harness Connector Inspection. The daytime running light function should now work
normally.
STEP 4. Check the wiring harness between daytime running light-ECU connector A-17 (terminal 1) and battery.
Q: Is the wiring harness between daytime running light-ECU connector A-17 (terminal 1) and battery in good condition?
YES: No action is necessary and testing is complete.
NO: The wiring harness may be damaged or the connector(s) may have loose, corroded or damaged terminals, or terminals pushed back in the
connector. Repair the wiring harness as necessary. The daytime running light function should now work normally.
STEP 5. Check the ground circuit to the daytime running light-ECU. Test at daytime running light-ECU connector A-17.
1. Disconnect daytime running light-ECU connector A-17 and measure the resistance available at the wiring harness side of the connector.
