Outlander AWD L4-2.4L SOHC (2003)
Q: Are front dome light connector D-04 and ETACS-ECU connector C-217 in good condition?
YES: Go to Step 5.
NO: Repair or replace the damaged components). Refer to Harness Connector Inspection. Verify that the front dome light illuminates normally.
STEP 5. Check the wiring harness between front dome light connector D-04 (terminal 1) and ETACS-ECU connector C-217 (terminal 6).
NOTE: Also check junction block connector C-210 for loose, corroded, or damaged terminals, or terminals pushed back in the connector. If junction
block connector C-210 is damaged, repair or replace the damaged component(s) as described in Harness Connector Inspection.