Outlander AWD L4-2.4L SOHC (2003)
b.
If the PCM was manufactured with the latest software update, the MUT-II will display "ECU data for above part # and ROM-ID is not
available." Do not continue with this procedure.
9.
If the MUT-II displays "Reprogramming is not possible on this ECU," verify that the correct ROM pack is installed.
10.
If the ECU can be reprogrammed, the MUT-II will display, "Do you want to reprogram this ECU?" Press "YES".
If an "Error 26 Download Error" screen displays, simply press "YES" to continue.
CAUTION
DO NOT DISCONNECT THE MUT-II CABLE. IF THE MUT-II IS DISCONNECTED AT THIS TIME, THE PCM WILL BE DAMAGED AND
MUST BE REPLACED.
11.
The MUT-II will display this screen as it reprograms the PCM. It will take approximately 18 minutes to complete.
DO NOT DISTURB THE HARNESS CABLES OR CONNECTIONS. INTERRUPTION DURING THE PROGRAMMING PROCESS COULD
CAUSE THE PCM TO LOSE DATA OR PREVENT FUTURE PCM REPROGRAMMING.
