Outlander AWD L4-2.4L SOHC (2003)
Air Bag(s) Arming and Disarming: Technician Safety Information
Servicing SRS
SERVICE PRECAUTIONS
DANGER
In order to avoid injury to yourself or others from accidental deployment of the air bag during servicing, read and carefully follow all the precautions and
procedures described in this manual.
After disconnecting the battery cable, wait 60 seconds or more before proceeding with the following work. The SRS system is designed to retain enough
voltage to deploy the air bag for a short time even after the battery has been disconnected, so serious injury may result from unintended air bag
deployment if work is done on the SRS system immediately after the battery cables are disconnected.
WARNING:
Battery posts, terminals and related accessories contain lead and lead compounds. WASH HANDS AFTER HANDLING.
Do not use any electrical test equipment on or near the SRS components, except those.
Never Attempt to Repair the Following Components: SRS-ECU, Clock Spring, Air Bag Module, Front impact sensor, Side Impact Sensor, Seat
Belt with Pre-tensioner. If any of these components are diagnosed as faulty, they should only be replaced, in accordance with the INDIVIDUAL
COMPONENT SERVICE procedures.
