mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Steering/Suspension - Steering Drift/Pull|Page 4070 > < Steering/Suspension - Steering Drift/Pull
Page 2
background image

These procedures are outlined in the flowchart on Attachment A of this bulletin.

1.

Verify the drift concern by driving the vehicle at a steady cruising speed on a known flat road with no road crown. It the road is not flat, it is
normal for the vehicle to drift slightly toward the low side of the crown.

2.

Adjust the air pressure in all four tires. Air pressure when cold should be 29 psi for both front and rear tires.

3.

Rotate the tires as follows:

a.

Rotate the front tires left-to-right.

Steering/Suspension - Steering Drift/Pull|Page 4070 > < Steering/Suspension - Steering Drift/Pull