mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Fluids, Refrigerants and Materials (Genuine Mitsubishi)|Page 899 > < A/C - Replacement of HVAC System
Page 1
background image

Refrigerant: Technical Service Bulletins
Fluids, Refrigerants and Materials (Genuine Mitsubishi)

No: TSB-98-00-004
DATE: September, 1998
MODEL: All 

SUBJECT:
AUTHORIZED GENUINE MITSUBISHI 
FLUIDS, REFRIGERANTS, AND MATERIALS

BACKGROUND INFORMATION

The MMSA Parts Department recently introduced a new chemical program to provide your dealership with a wide range of shop materials and car care
products. Genuine Mitsubishi Fluids, Refrigerants, and other materials are formulated especially for Mitsubishi vehicles. These are the best products
available to help Mitsubishi vehicles perform at their optimum performance level. These Genuine Mitsubishi products offer advantages over aftermarket
or generic brands when used properly in Mitsubishi vehicles.

Genuine Mitsubishi Products offered (see PARTS INFORMATION section for part numbers):

^

Multi-purpose Cleaner/Degreaser

^

White Lithium Grease

^

Refrigerant (R12 & R134a)

^

Long-Life Coolant

^

Carburetor Cleaner

^

Brake Fluid

^

Brake Cleaner

^

Windshield Washer Fluid

^

Silicone Spray

^

Automatic Transmission Fluid (ATF SP II M)

TECHNICAL INFORMATION

Factory Fill Long Life Coolant
Mitsubishi engineers have developed a superior, high-quality coolant with advantages over the competition. This product is standard factory-fill and is
now available for service replacement. Most aftermarket coolants are designed for cast iron engines and in most cases contain an inexpensive silicate
additive to inhibit aluminum corrosion. Use of silicates can cause water pump seal damage and radiator plugging. Therefore. silicate based antifreeze or
coolant is not acceptable for use in Mitsubishi vehicles. In contrast, Genuine Mitsubishi Coolant is designed for modern aluminum alloy engines. It
contains an organic corrosion inhibitor instead of silicates. This formula has the following advantages:

^

Eliminates possible gelling which can cause radiator plugging and then overheating.

^

No silicate abrasion of water pump mechanical seals which causes leakage.

^

Corrosion protection for aluminum heat rejecting components.

^

Superior long-term corrosion protection for other cooling system metals including steel, cast iron, copper, and solder.

Factory Fill Brake Fluid

Brakes are vital to automotive safety. Though often overlooked, brake fluid plays a significant role in braking performance. To make sure that the brakes
on Mitsubishi vehicles perform as designed, Mitsubishi introduces Genuine Mitsubishi Brake Fluid - a superior product designed by Mitsubishi
engineers for Mitsubishi brake and hydraulic clutch systems. This is the same OEM factory fill fluid currently used in all new Mitsubishi vehicles.
Mitsubishi Brake fluid offers these advantages:

^

Higher wet boiling point (better than all other competitive brands tested).

^

Less water absorption

^

High Temperature stability

^

Does not form harmful sedimentation

Factory Fill Windshield Washer Fluid

This is the same, high-quality OEM factory fill fluid currently used in all new Mitsubishi vehicles. This fluid is specially formulated for Mitsubishi
vehicles for extended vehicle life and is the best product available for Mitsubishi vehicles.

ATF SP II M (Automatic Transmission Fluid)

The 1999 Montero Sport automatic transmission must use new ATF SP II M rather than ATF SP II or Dextron-II to ensure shift quality. Mitsubishi now
has available a new ATF SP-II M transmission fluid for use in these 1999 models. Mitsubishi ATF SP II M can also be used in, and is recommended for
any Mitsubishi vehicle which calls for ATF SP II or Dextron-II.

^

Specially formulated for use in all Mitsubishi automatic transmissions.

Fluids, Refrigerants and Materials (Genuine Mitsubishi)|Page 899 > < A/C - Replacement of HVAC System