Pickup 4WD V6-2972cc 3.0L SOHC (1991)
Alignment: Service and Repair
Front Camber
2WD Pickup
1.
Hold upper arm shaft to crossmember bolt and remove nut from engine compartment side.
2.
Adjust number of shims between upper arm shaft and crossmember. A total of approximately .16 inch of shim thickness is normally required for
standard camber. A .039 inch adjustment of shim thickness provides approximately 13 minutes adjustment of camber.
4WD Pickup
Adjust camber by adjusting number of shims between upper arm shaft and arm post of side frame. A .039 inch adjustment of shim thickness provides
approximately 13 minutes adjustment of camber.