Precis L4-1468cc 1.5L SOHC (1993)
Brake Rotor/Disc: Service and Repair
1. Raise and support vehicle, then remove wheels.
2. Remove caliper as outlined under "Caliper Service".
3. Remove drive axle nut, then disconnect tie rod and ball joint using separator tool No. 09568-31000, or equivalent.
Fig. 2 Axle Separation From Hub
4. Separate drive axle from hub using pusher tool No. 09526-11001, or equivalent, Fig. 2.
5. Remove hub and knuckle from strut as an assembly.
Fig. 3 Hub Removal
6. Place knuckle in a vise, then use puller tool Nos. 09517-21600 and 09517-21500, or equivalents, Fig. 3, to remove hub from knuckle. Do not use
a hammer to remove hub. Bearing damage will result.
7. Remove bolts, then separate rotor from hub.
8. Reverse procedure to install, noting the following:
a. Torque rotor to hub bolts to 37-44 ft. lbs.
