Precis L4-1468cc 1.5L SOHC (1993)
Water Pump: Service and Repair
1. Disconnect battery ground cable and drain cooling system.
2. On models with power steering, remove power steering pump and bracket leaving hoses connected, and secure pump aside.
3. Remove timing belt as outlined under Timing Belt.
4. Remove alternator brace and disconnect hoses from water pump.
5. Remove water pump bolts, noting length and position for installation reference, then the water pump, gasket and O-ring.
6. Reverse procedure to install, noting following:
a. Torque 28 mm pump bolts to 10 ft. lbs.
b. Torque 65 mm pump bolt to 17 ft. lbs.
Fig. 19 Water Pump Bolt Lengths & Locations
c. Refer to Fig. 19 for bolt length and position.
