Precis L4-1468cc 1.5L SOHC (1993)
Heated Oxygen Sensor: Service and Repair
Oxygen Sensor Location
REMOVAL
1.
Disconnect the harness terminal.
2.
Remove the sensor with a suitable socket or wrench.
Oxygen Sensor
INSTALLATION
1.
Apply a thin coating of anti-seize compound to the threads.
NOTE: Do Not contaminate the sensor tip with compound.
2.
Install the sensor and torque to 29-36 ft.lb.
3.
Apply a thin coating of dielectric compound to the connector.
4.
Connect harness terminal.