Precis L4-1468cc 1.5L SOHC (1993)
Apply positive power to terminal 6 with negative power applied to terminal 7.
Check terminals 1 and 4: should be conductive (0 ohm).
Remove power.
To test coil L3:
Check terminals 1 and 2, should be non-conductive (infinite ohm).
Check terminals 7(+) and 5(-), should be non-conductive (infinite ohm).
Check terminals 5(+) and 7(-), should be conductive (0 ohm).
Apply positive power to terminal 5 with negative power applied to terminal 7.
Check terminals 1 and 2, should be conductive (0 ohm)
Remove power.
Test between each terminal and the case: All terminals should be non-conductive (infinite ohm).
2.
If the results are not satisfactory, replace the control relay.