Precis L4-1468cc 1.5L SOHC (1993)
! WARNING
^
Do not inhale the smoke produced when the air bag is deployed.
^
The air bag module will be quite hot after deployment. To avoid personal injury, do not handle for at least 30 minutes.
11.
If the air bag module does not deploy after properly following these procedures, do not go near the module. Contact your regional Tech Line for
instructions.
DISPOSAL PROCEDURE
After deployment, dispose of the air bag module as follows:
1.
Allow the unit to cool for at least 30 minutes.
2.
Do not allow water or oil to contact the air bag after deployment.
! WARNING
Wear safety glasses and heavy gloves when handling the air bag module. If residue material gets into your eyes or on your skin, immediately rinse the
affected area with large quantities of clean water. If any irritation develops, seek medical attention immediately.
3.
Tightly seal the air bag module in a strong vinyl bag.
4.
Wash your hands thoroughly after handling the air bag module.
IMPORTANT:
Dispose of the air bag module immediately. Consult your dealership's legal counsel for Federal, state, and local laws or regulations pertaining to
proper disposal of the air bag module.
PARTS INFORMATION
Description
Part Number
Driver Side SRS air bag adapter harness
MR203491
Passenger Side SRS air bag adapter harness
MB686560
WARRANTY INFORMATION
Normal warranty replaced parts storage and retention policies apply. Do not dispose of any replaced air bag or related parts until after the normal holding
period or until a "Scrap Now" notice appears on your statement.