Precis L4-1468cc 1.5L SOHC (1993)
Power Steering Pump: Testing and Inspection
Fig. 7 Pressure Gauge Installation
1. Disconnect pressure hose, then connect pressure gauge tool Nos. 09572-33100 and 09572-21200, or equivalents, Fig. 7.
2. Bleed air from system.
3. Start engine and turn steering wheel from stop to stop until fluid temperature reaches 122°F.
4. Increase engine speed to 1000 RPM.
5. Close the shutoff valve and read system pressure. Pressure with valve closed should be as specified in "Power Steering Pressure Specifications"
chart. Do not allow valve to be closed for more than ten seconds.
6. Remove gauge tools and bleed system as outlined under "Bleeding System".
