Raider V6-3.7L SOHC (2006)
Battery Temperature Sensor: Service and Repair
SENSOR - BATTERY TEMPERATURE
REMOVAL
The battery temperature sensor (2) is located under vehicle battery and is attached to a mounting hole on battery tray (4).
1. Remove battery. Refer to Battery for procedures.
2. Disconnect sensor (2) from engine wire harness (3).
3. Pry sensor straight up from battery tray mounting hole.
INSTALLATION
1. Feed engine wire harness (3) through hole in top of battery tray and attach sensor (2).
2. Press sensor (2) into hole of battery tray (4).
3. Install battery. Refer to Battery for procedures.
