Raider 2WD V6-3.7L (2008)
6. If equipped, connect the headliner wire harness connector (2) to the inside rear view mirror.
7. If equipped, install the overhead console.
8. Install the sun visors (4).
9. If equipped, install the front dome lamp.
10. Install the A-pillar trim panels.
11. If equipped, install the rear dome lamp.
12. Install the rear jumper seat headrest sleeves in the headliner.
13. Install the rear jumper seat headrests.
14. Install the cab back trim panel.
15. Install the upper C-pillar trim panels.
