mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Accumulator HVAC|Description and Operation|Page 4529 > < Accumulator HVAC|Description and Operation
Page 2
background image

-

Replacement of the refrigerant line O-ring seals and gaskets is required anytime a refrigerant line is opened. Failure to replace the rubber O-ring
seals and metal gaskets could result in a refrigerant system leak.

The A/C accumulator has no serviceable parts except for the O-ring seals and gaskets. The O-ring seals used on the connections are made from a special
type of rubber not affected by R-134a refrigerant. The O-ring seals and gaskets must be replaced whenever the A/C accumulator is removed and
installed.

The A/C accumulator cannot be repaired and must be replaced if found to be leaking or damaged, or if an internal failure of the A/C compressor has
occurred.

Accumulator HVAC|Description and Operation|Page 4529 > < Accumulator HVAC|Description and Operation