Raider 2WD V6-3.7L (2008)
1. Align the base of the cargo lamp bulb (2) with the socket (4).
2. Push the bulb straight into the socket until the base is firmly seated.
3. Align the socket and bulb with the keyed opening on the back of CHMSL housing (1).
4. Insert the socket and bulb into the housing until the socket is firmly seated.
5. Rotate the socket clockwise about 30 degrees to lock it into place.
6. Position the CHMSL into the opening in the rear cab roof header panel.
7. Install and tighten the two screws that secure the CHMSL to the header panel. Tighten the screws to 2 N.m (20 in. lbs.).
8. Reconnect the battery negative cable.
