Raider 2WD V6-3.7L (2008)
9. Add fluid to bring level up to MAX arrow mark.
When fluid level is correct, shut engine off, release park brake, remove funnel, and install dipstick in fill tube.
Service Information - 545RFE
TRANSMISSION FILL
To avoid overfilling transmission after a fluid change or overhaul, perform the following procedure:
1. Remove dipstick and insert clean funnel in transmission fill tube.
2. Add following initial quantity of ATF +4 to transmission:
1) If only fluid and filter were changed, add 10 pints (5 quarts) of ATF +4 to transmission.
2) If transmission was completely overhauled and the torque converter was replaced or drained, add 24 pints (12 quarts) of ATF +4 to transmission.
3. Check the transmission fluid.
