Raider 2WD V6-3.7L (2008)
18. Install the input clutch assembly into Input Clutch Pressure Fixture 8260 (2).
19. Mount a dial indicator C-3339A (1) on the input clutch hub. Push down on the UD clutch discs and zero the indicator against the underdrive clutch
discs. Apply 20 psi of air pressure to the underdrive clutch and record the dial indicator reading. Measure and record UD clutch pack measurement
in four (4) places, 90° apart. Take average of four measurements and compare with UD clutch pack clearance specification. The correct clutch
clearance is 0.84-1.54 mm (0.033-0.061 in.). The reaction plate is not selective. If the clutch clearance is not within specification, replace the
