mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Body - Rear Sliding Glass Wind Noise/Water Leaks|Page 6688 > < Switch - Window/Door Lock|Page 6678
Page 1
background image

Back Window Glass: Customer Interest
Body - Rear Sliding Glass Wind Noise/Water Leaks

No.: TSB-08-42A-015

DATE: September, 2008

MODEL:
2008 Raider

SUBJECT:
WIND NOISE, WATER LEAK AND/OR BSR FROM REAR SLIDING GLASS

PURPOSE

Some vehicles equipped with a sliding rear glass may have a wind noise, water leak and or BSR condition at the seal between the window opening and
the glass. This Technical Service Bulletin advises dealers to replace the sliding glass assembly to eliminate the condition.

THIS REPAIR SHOULD BE A TOP PRIORITY FOR UNSOLD VEHICLES AND SHOULD BE COMPLETED PRIOR TO SALE TO AVOID
SUSPECT VEHICLES BEING DELIVERED TO CUSTOMERS. SOLD VEHICLES SHOULD BE COMPLETED DURING NORMAL SERVICE
VISITS.

AFFECTED VEHICLE(S)
2008 Raiders equipped with Rear Sliding Window.

VIN RANGE: Certain vehicles built between VINs (last 8 positions) 8S588017 - 8S63499 8.

IMPORTANT:

Not all vehicles in the VIN range are affected. Download a VIN list that contains all affected vehicles that were shipped to your dealership. Dealers
will receive an automatic shipment of rear sliding window assemblies to support this repair procedure based on the number of VINs currently in their
new vehicle inventory. Dealers should complete replacement of the rear sliding window on all affected vehicles in inventory.

REPAIR PROCEDURE

1.

Download the VIN list for vehicles shipped to your dealership.

a.

From the Mitsubishi Dealer Link (MDL) main page, select E-Reports from the pull down menu in the "Reporting Tools" panel and click on
the Service button.

Body - Rear Sliding Glass Wind Noise/Water Leaks|Page 6688 > < Switch - Window/Door Lock|Page 6678