Raider 2WD V6-3.7L SOHC (2007)
8. Install 6 ignition coils.
9. Connect electrical connectors to throttle body.
10. Connect electrical connectors at all fuel injectors. Refer to graphic. Push connector onto injector (1) and then push and lock red colored slider (2).
Verify connector is locked to injector by lightly tugging on connector.
11. Connect necessary vacuum lines to throttle body.
12. Install air resonator mounting bracket near front of throttle body (2 bolts).
13. Connect fuel line latch clip and fuel line to fuel rail.
14. Install air box to throttle body.
15. Install air duct to air box.
16. Connect battery cable to battery.
17. Start engine and check for leaks.
