Raider 4WD V6-3.7L SOHC (2007)
6. Pull up on the cable (2) and remove the cable with the body grommet (1).
7. Lower vehicle.
8. Push ball end of cable out (4) of pedal clevis with small screwdriver.
9. Compress cable end fitting (4) at the pedal bracket (5) and remove the cable (4).
10. Remove the left cowl trim and sill plate.
11. Pull up the carpet and remove the cable from the body clip.
INSTALLATION
1. From inside the vehicle, insert the cable end fitting (4) into the hole in the pedal assembly (5).
2. Seat the cable retainer in the pedal assembly (4).
3. Engage the cable ball end in clevis on the pedal assembly.
